The Ammonia Nitrogen Removal Membrane is an advanced wastewater treatment technology designed for efficient ammonia nitrogen (NH₃-N) removal. The system combines traditional ammonia stripping and acid absorption processes into a single membrane module, performing both stripping and absorption simultaneously. This integration improves ammonia removal efficiency and simplifies operation. It is suitable for various types of wastewater requiring ammonia nitrogen removal.
The membrane contactor operates under conditions of 35–45 °C water temperature, pH 10.5–12, suspended solids (SS) ≤5 mg/L, and surface tension ≥60 mN/m. Ammonia nitrogen in the water is stripped through the membrane to the outside, where it is absorbed by an acidic solution. By integrating the stripping tower and absorption tower in a single module, the system enhances mass transfer efficiency while reducing space requirements.
· Integrated Design: Combines the functions of stripping and absorption in a single membrane module.
· High Ammonia Removal Efficiency: Simultaneous stripping and absorption significantly increase NH₃-N removal rates.
· Clear Operating Conditions: Optimized for water temperature 35–45 °C, pH 10.5–12, SS ≤5 mg/L, surface tension ≥60 mN/m.
· Simplified Process: Reduces equipment footprint and operational complexity.
· Easy Maintenance: Compact module structure allows convenient installation and replacement.
· Wastewater Ammonia Removal: Effective NH₃-N removal in industrial wastewater, municipal sewage, and other ammonia-containing waste streams.
| Parameter | WTJ-6X14 | WTJ-6X28 | WTJ-10X28 | WTJ-12X28 | WTJ-16X28 | WTJ250 | WTJ400 |
| Shell Diameter | 6 inch / 160mm | 6 inch / 160mm | 10 inch / 250mm | 12 inch / 315mm | 16 inch / 400mm | 250mm | 400mm |
| Shell Material | UPVC | UPVC/PP | UPVC/PP | UPVC | UPVC | UPVC/PP | UPVC/PP |
| Module Length | 780mm | 1056mm | 1081mm | 1188mm | 1156mm | 1161mm | 1281mm |
| Module Weight | 6kg | 11kg | 25kg | 85kg | 92kg | 27.5kg | 100kg |
| Membrane Area | 9.2m² | 32m² | 74m² | 105m² | 163m² | 83m² | 200m² |
| Fiber Material | Modified PP | ||||||
| Fiber Inner/Outer Dia. | 0.3 / 0.4mm | ||||||
| Flow Rate | 0.2~0.25 m³/h | 1~1.5 m³/h | 2~3.5 m³/h | 3~6 m³/h | 6~14 m³/h | 2~3.5 m³/h | 6~14 m³/h |
| Pressure Loss | 0.01~0.02 MPa | ||||||
| Removal Rate | 40~65% | 45~75% | |||||
| Max Series Connection | ≦6 stages | ≦8 stages | |||||
| Inlet Ammonia-N | <20000ppm | ||||||
| Effluent Ammonia-N | <1ppm | ||||||
| Operating Pressure | ≦0.3MPa | ||||||
| Operating Temperature | 25~40℃ | ||||||
| pH Range | 0.5~13 | ||||||
| Surface Tension | ≧65mN/m | ||||||